EasyWeed applies at a lower temperature, backing can be peeled hot or cold, and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed is thinner and offers a one-second tack application that's great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser systems.
Cricut: Blade: Standard Setting: Iron-on
Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4
Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 4
*Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold |
Application Instructions (heat press)
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
Laundering:
• Wait 24 hours before first wash
• Machine wash warm or cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean
|
